Tenax^®/Öl-Kit for the Migration Cell System-Siegwerk (Sieg-mi-Flex)

In addition to tests using the Tenax^®, the Tenax^®/Oil-Kit is also used for migration tests with vegetable oil since for many customers the fixing plate with the GL45 fitting is easier to clean in a dishwasher than the centre ring with GL14 cast-in and cast-out fittings.

• Temperature resistant -15 °C to 180 °C, pressuretight up to 1 bar
• This Sieg-Mi-Flex cell design takes one test specimen (on bottom!) and it is laid horizontally

Stainless steel Central Ring:

Item No.:	Nominal diameter:	Surface*:	Filling volume**:
250-0591775	DN120	1,0 dm²	220 ml
* Approx. surface with 1 test specimen/with 2 test specimens ** Approx. filling volume of the central ring

Stainless steel Central Ring for the Tenax^®/Oil-Kit for the Siegwerk Migration Cell System, consisting of:

• 1 x stainless steel central ring (V4A 1.4571) without GL14 cast-in and cast-out connecting pieces
• 2 x FEP/silicone O-rings that fit in the central ring’s groove (top and bottom)

Glass Central Ring:

Item No.:	Nominal diameter:	Surface*:	Filling volume**:
250-0649100	DN120	1,0 dm²	220 ml
* Approx. surface with 1 test specimen/with 2 test specimens ** Approx. filling volume of the central ring

Glass Central Ring for the Tenax^®/Oil-Kit for the Migration Cell System-Siegwerk, consisting of:


• 1 x Glass Central Ring (Borosilicate glass 3.3) without GL14 cast-in and cast-out fittings
• 2 x FEP/silicone O-rings that fit in the central ring’s groove (top and bottom)

Fixing Plate Upper Parts:

Borosilicate glass upper fixing plate for the Tenax^®/Oil-Kit for the Migration Cell System-Siegwerk, consisting of:

• 1 x borosilicate glass upper fixing plate and centric GL45 fitting with 4 x drill holes, without M8 inner thread, 140 × 140 mm
• 4 x PTFE hole inserts

Item No.: 250-0649049



Stainless steel upper fixing plate for the Tenax^®/Oil-Kit for the Siegwerk Migration Cell System, consisting of:

• 1 x Stainless steel (VA 1.4571) upper fixing plate and centric GL45 fitting, without screw cap, with 4 x drill holes, without M8 inner thread, 140 x 140 mm
• 4 x PTFE hole inserts

Item No.: 250-0788274

Screw Cap:

• easy-to-gripedging made out of PPS
• black
• GL45 closed
• with PTFE-coated silicone seal for the GL45 fitting on the Fixing Plate Upper Part with centric GL45 fitting
• Packaging unit = 1 pcs.

Item No.: 120-0649056

In addition you can order our Stainless steel Fixing Plate Set (Item No.: 250-0239899) and the Glass Fixing Plate Set (Item No.: 250-0277594)..